Lightobject XLE 6040 XY Stage

Bearings/Motors/Belts/Gears/Etc.

Lightobject XLE 6040 XY Stage

Postby iGull » Sun Jun 23, 2013 3:55 pm

Hi
Wondered if anyone has purchased a lightobject XLE 6040 XY stage ?
Unfortunately, Marco doesn't have any drawings for it and I really do need exterior sizes to work with ASAP.
If someone has one, would they be prepared to offer some relatively accurate sizes ?
Ideally a 3D sketchup model would be the business :-)
Metric would be best too :lol:
TIA
Neil
EMOs are a sign of weakness ...
iGull
 
Posts: 171
Joined: Mon Dec 06, 2010 2:59 pm
Location: Edinburgh, Scotland

Re: Lightobject XLE 6040 XY Stage

Postby TLHarrell » Sun Jun 23, 2013 10:06 pm

I could swear I saw somebody on here post a laser project based on it. I can't remember which it was. You'll have to go digging. If my muzzy brain coughs it up later, I'll post it here.
40w Full Spectrum Engineering 5th Gen Hobby 20"x12" w/ Rotary Engraver
South San Francisco Bay Area - Sales and Support Representative for Full Spectrum Engineering
408-47-LASER - Skype: whitelightlaser-thomas - Facebook: White Light Laser
TLHarrell
 
Posts: 419
Joined: Thu Jul 28, 2011 11:30 pm
Location: Morgan Hill, CA

Re: Lightobject XLE 6040 XY Stage

Postby wmgeorge » Mon Mar 03, 2014 10:12 pm

iGull wrote:Hi
Wondered if anyone has purchased a lightobject XLE 6040 XY stage ?
Unfortunately, Marco doesn't have any drawings for it and I really do need exterior sizes to work with ASAP.
If someone has one, would they be prepared to offer some relatively accurate sizes ?
Ideally a 3D sketchup model would be the business :-)
Metric would be best too :lol:
TIA
Neil


Bringing a post back from the past, but Neil did you ever get this info or did you do the build using the XLE 6040 Lightobject X-Y frame? I am thinking of the same thing..
Retired guy, Central Iowa US. Master Electrician Hobby Machine and Metal Fab Shop.
wmgeorge
 
Posts: 44
Joined: Wed Feb 26, 2014 2:41 pm

Re: Lightobject XLE 6040 XY Stage

Postby neorazz » Tue Mar 04, 2014 3:56 am

here's a rough measurement of the 400mm x 600mm
gantry.jpg

highest area clearance 3.5 " 89mm
A 31.25 794mm
B 19.25 489mm
C 30.75 781mm
D 29.25 743mm
E 17 432mm
F25.75 654mm
neorazz
 
Posts: 6
Joined: Fri Apr 15, 2011 11:37 am

Re: Lightobject XLE 6040 XY Stage

Postby wmgeorge » Tue Mar 04, 2014 2:06 pm

I am wondering, did you build or are now building a CNC laser using this? Thank you again, its exactly what I needed.
Retired guy, Central Iowa US. Master Electrician Hobby Machine and Metal Fab Shop.
wmgeorge
 
Posts: 44
Joined: Wed Feb 26, 2014 2:41 pm

Re: Lightobject XLE 6040 XY Stage

Postby neorazz » Tue Mar 04, 2014 10:42 pm

i bought one a couple of years ago with the idea of framing around it as previous cnc builds were hard to keep aligned . i planned on just making a frame but then i saw the mitsumi sale and dove in head first .

so i have the the x-y , 3 axis controller a pc, all mirrors and focus mount , im only short a frame and a laser and focus and miscellaneous bits , i was saving the laser for last as its the single most expensive bit get my mechanics up and running test with a sharpie then buy the laser
neorazz
 
Posts: 6
Joined: Fri Apr 15, 2011 11:37 am


Return to Mechatronics

Who is online

Users browsing this forum: No registered users and 5 guests

cron