Z table questions

Extrusions/Tubing/Hinges/Etc.

Z table questions

Postby neuman5022 » Wed Sep 30, 2015 12:05 pm

Hello folks,


I will build my Z frame, table and assemblies pretty soon. I just need to clarify something.

On the system drawing and plans in states that the z table frame should be covered with some kind of material.

In some youtube footage I have noticed many machines running just the honeycomb or stripes without anything on the bottom.

My questions then - should there be any bottom surface below the honeycomb, and if yes - what type of material you use.

Nant thanks

Isaac
neuman5022
 
Posts: 27
Joined: Thu May 28, 2015 1:23 am

Re: Z table questions

Postby cvoinescu » Wed Sep 30, 2015 12:27 pm

There's no need for anything under the honeycomb. The laser is much too out of focus to do any damage to the bottom of the enclosure.
cvoinescu
 
Posts: 501
Joined: Thu Aug 09, 2012 9:12 am
Location: Camberley, Surrey, UK

Re: Z table questions

Postby neuman5022 » Wed Sep 30, 2015 8:43 pm

Thanks mate - Will do just that.

Cheers

Isaac
neuman5022
 
Posts: 27
Joined: Thu May 28, 2015 1:23 am


Return to Enclosures/Framing Etc.

Who is online

Users browsing this forum: No registered users and 1 guest