greenvandan wrote:I put mine the other way around, slot down, then used the narrow corners (asymmetrical L shape) from Misumi to connect the top bar. The small L is not as strong but the top bar gets tied in with the tube brackets and mirror bracket so it winds up pretty solid.
greenvandan wrote:That's what I was referring to as the top bar. I put the L-bracket vertically, so bottom of cross bar to slot in the makerslide. I found the drawing with the count of the insertion nuts to be really accurate and informative as to how things fit together. ex. the cross bar lists 3 insertion nuts in the bottom groove. http://www.buildlog.net/documents/d30027_rev_5.pdf
Return to Enclosures/Framing Etc.
Users browsing this forum: No registered users and 8 guests