FOR SALE: 2.x LASER HDPE Plastic parts/brackets kit

CNC/Laser Related Items Only Please

FOR SALE: 2.x LASER HDPE Plastic parts/brackets kit

Postby injunear » Wed Sep 03, 2014 1:47 am

I bought the metal gantry parts here from RSM5178,( http://www.buildlog.net/forum/viewtopic.php?f=20&t=2456) here in this forum but Bart seems not to provide the plastic stuff anymore.

I have cut a set for myself on my CNC router. If there's any interest I can provide a few sets to anyone interested. The cost will be $75+ $6 shipping USPS Flat Rate Priority Mail. The material costs are around $25 (HDPE plastic) and it takes about 4+ hours of my time to route the parts out.......
My email is: kaydee457@yahoo.com in the event that you're reading this and not able to post here.
Bob T.
Last edited by injunear on Wed Dec 31, 2014 4:15 pm, edited 9 times in total.
injunear
 
Posts: 87
Joined: Thu Aug 14, 2014 11:35 pm

Re: 2.x HDPE Plastic brackets and parts available

Postby injunear » Mon Sep 08, 2014 6:45 am

I added some photos of the parts I made. It should be noted that any part that has a bearing installed I assured that it would require an 'interference fit', which means the bearing is captive and tight in the part and will not spin in the cavity.
I also optionally supply a larger Tube mount and it will carry a tube that's 80~85mm in diameter and the mount bracket will be two piece, divided in half, using two screws. Additionally, it maintains the centerline that Bart established with the 40 watt tube so the mirror brackets, etc. will remain the same for alignment.

For now, here's what's supplied with your order (NO BEARINGS ARE INCLUDED):

Image

Image

Image

Note, larger bracket is for 60, 80, 100W (80mm~85mm Dia. max) tube. Also note that it
may not fit the 'standard' cabinet (Bart's design). I just wanted to show the centerline and relationship to the
mount is the same between the brackets , however, obviously the larger bracket is taller.

**THIS TUBE MOUNT IS OPTIONAL and supplied in lieu of the 40watt brackets for an additional $10
Image


My email is: kaydee457@yahoo.com in the event that you're reading this and not able to post here.
Bob T.
Last edited by injunear on Wed Oct 08, 2014 7:13 pm, edited 5 times in total.
injunear
 
Posts: 87
Joined: Thu Aug 14, 2014 11:35 pm

Re: 2.x LASER HDPE Plastic brackets and parts for sale

Postby injunear » Sat Oct 04, 2014 5:24 pm

I still have a bag of parts for the 'stock' 2.x ready to be shipped. Also shown is the optional 80 watt mounts (not included). If you want a set of these instead of the 40 watt mounts then PM me, or email and indicate so. They are an additional $10.

Bob T.

Image
injunear
 
Posts: 87
Joined: Thu Aug 14, 2014 11:35 pm

Re: 2.x LASER HDPE Plastic brackets and parts for sale

Postby injunear » Mon Oct 13, 2014 7:53 pm

One sold....I still have two sets ready to ship.
injunear
 
Posts: 87
Joined: Thu Aug 14, 2014 11:35 pm

Re: 2.x LASER HDPE Plastic brackets and parts for sale

Postby injunear » Sun Oct 26, 2014 11:54 pm

bump! :D
injunear
 
Posts: 87
Joined: Thu Aug 14, 2014 11:35 pm

Re: 2.x LASER HDPE Plastic brackets and parts for sale

Postby injunear » Mon Nov 03, 2014 2:08 am

again :roll:
injunear
 
Posts: 87
Joined: Thu Aug 14, 2014 11:35 pm

Re: 2.x LASER HDPE Plastic parts/brackets kit for sale

Postby injunear » Wed Nov 19, 2014 6:56 am

:oops:
injunear
 
Posts: 87
Joined: Thu Aug 14, 2014 11:35 pm

Re: 2.x LASER HDPE Plastic parts/brackets kit for sale

Postby injunear » Thu Dec 11, 2014 2:49 am

Happy Holidays....
injunear
 
Posts: 87
Joined: Thu Aug 14, 2014 11:35 pm

Re: 2.x LASER HDPE Plastic parts/brackets kit for sale

Postby injunear » Mon Dec 15, 2014 4:27 am

LAST ONE and then that's IT! No more......Get it while you can...... :!:
injunear
 
Posts: 87
Joined: Thu Aug 14, 2014 11:35 pm

Re: 2.x LASER HDPE Plastic parts/brackets kit for sale

Postby injunear » Sat Dec 27, 2014 12:50 am

Last one gone....email for availability but from this point on I will not stock 'kits' but rather build when ordered.
Bob T.
injunear
 
Posts: 87
Joined: Thu Aug 14, 2014 11:35 pm

Next

Return to For Sale and Wanted

Who is online

Users browsing this forum: No registered users and 14 guests

cron