Launching Prusa i3 Kit @599 USD

General discussion of 3D printers

Launching Prusa i3 Kit @599 USD

Postby makemendel » Thu Nov 06, 2014 11:43 am

This kit contains all the required parts to build a complete Prusa i3 machine.It is much easier to assemble than the original Prusa i3

Features :
- Based on the Prusa i3 design
- More easier to assemble than the original Prusa i3
- Smart LCD Control Support
- Prints with both PLA and ABS

Technical Specifications :
1) Build Volume : ( 214 x 214 x 165) mm
2) No. of Extruders : 1
3) Layer Thickness : 0.1 mm - 0.3 mm (This is optimal,but you can go below that)
4) XY Positioning Precision : 0.0125 mm
5) Nozzle Diameter : 0.4mm
6) Filament Diameter : 1.75 mm
7) Power Supply : Input 230 V / Output 12V DC 240 W
8) Electronics : PrintrBoard REV D ( 4 Layer Board)
9) HotEnd : J head HotEnd with Catridge heater, 230C MAX Temperature
10) HeatBed: MK2 HeatBed, 110C MAX Temperature
11) Printing Material : Both PLA and ABS.
12) Build Material : Uses high quality laser cut 6mm acrylic
13) Motors :NEMA17 Stepper motors,1.8 step angle (4.4 kg/cm torque)
14) Connectivity : USB,Micro SDCard using LCD Controller
15) Kit Weight : 8 Kg

You can check out the Printer at http://makemendel.com/3d-printer/prusa-i3-kit

Here is the First look of the Printer

Fotor1105164821.jpg
makemendel
 
Posts: 12
Joined: Tue Jul 15, 2014 10:32 am

Re: Launching Prusa i3 Kit @599 USD

Postby josephfrancis » Thu Jul 16, 2015 2:46 am

Prusa i3 kit at $269 USD. Free shipping.

10 Printing materials support: PLA, ABS, HIPS, WOOD, FLEXIBLE PLA, NYLON, Polycarbonate, PVA, TPU and Luminous material.

https://www.3dprintersonlinestore.com/hesine-prusa-i3-reprap-kit
josephfrancis
 
Posts: 3
Joined: Tue Oct 01, 2013 12:12 pm


Return to 3D Printer General Discussion

Who is online

Users browsing this forum: No registered users and 12 guests

cron