What Rear Config

Questions, Suggestions, Tips, Etc

What Rear Config

Postby kpaul247 » Mon Sep 09, 2013 6:52 pm

I ordered the parts kit in April of this year. I am putting everything together now but can't find anything about the rear plate that I received with the kit.

I am using the LO DSP but did not have an option for that when I ordered the kit.

My plate has the single power input on the left, the two smaller power outputs on the right, then three smaller vertical rectangular opening just below those. Under that is the serial port and the 3 small holes. No USB cutouts.

What are the 3 small rectangle cutouts for?

Thanks!
kpaul247
 
Posts: 25
Joined: Fri Mar 08, 2013 2:06 pm

Re: What Rear Config

Postby bdring » Mon Sep 09, 2013 10:46 pm

See this post and thread. It tells you what those are I think

viewtopic.php?f=28&t=1631&start=20#p15700
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: What Rear Config

Postby Improbable Construct » Mon Sep 09, 2013 11:53 pm

The picture is a little blurry but here is how mine ended up.
image.jpg


The three small holes are blocked by a SSR for the air output.
I am planing on making a block out plate for the DB25 hole as well.
I ended up needing one USB A to B, and one USB B to A keystone jack to wire up the DSP correctly.
Improbable Construct
 
Posts: 57
Joined: Wed Feb 15, 2012 1:27 am

Re: What Rear Config

Postby kpaul247 » Tue Sep 10, 2013 2:15 am

Do you happen to have the p/n of those and the supplier?

Thanks so much!
kpaul247
 
Posts: 25
Joined: Fri Mar 08, 2013 2:06 pm

Re: What Rear Config

Postby bdring » Tue Sep 10, 2013 2:24 am

http://www.l-com.com/ ...has dozens of types. I think you can get them at Frys type places too.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: What Rear Config

Postby Improbable Construct » Tue Sep 10, 2013 6:18 am

I got all the back panel stuff from allied electronics.

Qty. Stock# Mfr. Part # Cust. Part # Price (USD) Total (USD)
2 70080816 6600.3300 $1.790 $3.58
Outlet; Screw-On Mount; 10 A; 250 VAC; gt 10 Megohms @ 500 VDC, 1 Minute; Black
Ship Method: FedEx Ground

1 70133414 765-00/001 $7.400 $7.40
MULTI-FUNCTION MODULE, IEC 32-C14, SCREW MOUNT, PLASTIC, DPST SWITCH
Ship Method: FedEx Ground

2 70126854 ECF504-AB $8.880 $17.76
ADPT USB A-B CPLR KIT
Ship Method: FedEx Ground

1 70126207 ECF504-C5 $9.960 $9.96
Coupler Kit, Panel; RJ 45
Ship Method: FedEx Ground

Subtotal*: $38.70

I then had to switch out one of the keystones for this one:
http://www.amazon.com/dp/B007PZB9EY/ref=pe_385040_30332190_pe_175190_21431760_3p_M3T1_ST1_dp_1
Improbable Construct
 
Posts: 57
Joined: Wed Feb 15, 2012 1:27 am

Re: What Rear Config

Postby kpaul247 » Tue Sep 10, 2013 2:40 pm

Thanks for the info guys!
kpaul247
 
Posts: 25
Joined: Fri Mar 08, 2013 2:06 pm


Return to 2.x Laser Support

Who is online

Users browsing this forum: No registered users and 13 guests