My first set of skins is done. So far I have about 4 full sets and several partial sets. I will probably finish off the raw material I have tomorrow. I bought all the Ultra Marine Blue they had (9 sheets). The price is going to be $130 for the skins plus $25 for the acrylic window. They take about 2 hours per set. Maybe some day I will get a 4' x 8' router with a vacuum hold down and it will be easier. They look great.
The material ships will a protective film and I have left that on. The film makes the edges look rough because it curls up and sticks to the chips, but peel it back and the edge finish is good. There is a gloss side and a matte side. The film is printed with text to identify that, but it is easy to tell when the film is off. Even with the film off, the paint is really tough. All panels should be gloss side out except the bottom, which is gloss side up.
I managed to cut all day without breaking my $35 bit. I made a support arm, to support the material behind the router.