MakerSlide T-Slot compatibility ?

General questions and comments.

MakerSlide T-Slot compatibility ?

Postby robertely » Tue Apr 24, 2012 8:54 pm

Hi guys, I've never worked with T-Slot before and just had a few questions on compatibly.

From what I can tell T-Slot profiles come in many makes and models.

http://us.misumi-ec.com/us/ItemDetail/10302368830.html
I believe above link is more or less identical to the maker beam minus the v-rail. Is this correct ?
Also, I can't easily link to 8020.net's catalog, but am I also right in assuming this is compatible with the 20-2040 series profile ?

And lastly, How do I find fasteners and brackets? It looks like at least on the misumi site, any series 5 brackets will work but i'm not clear on how this convention works.

To give you an idea of what i'm building it's a simple plotter. I ordered 3 lengths of 1200mm maker slide, and i need to build a frame out of 2 maker beams and 2 standard t_slot extrusions.


If any one could help me out I would appreciate it, Thanks!
robertely
 
Posts: 1
Joined: Tue Apr 24, 2012 7:44 pm

Return to MakerSlide General Discussion

Who is online

Users browsing this forum: No registered users and 6 guests