Synrad laser 48-2

Discussions on optics for laser cutter/engravers

Synrad laser 48-2

Postby joskerel » Mon Dec 03, 2012 9:24 am

Hello,

i've just bought myself a broken speedy c-25 from Trotec, its the older model off the 300, these day's.
I don't know if the laser itself is broken or not but was thinking off changing all the electronics to a dsp controler from retinaengrave or thunder laser.
But at a closer look @ what i bought i realised thad this laser will not work on any off these because the TLL and PWM signals or integrated in one cable
that enters the laser. If anyone knows how i can do this thad would be awesome, and maybe how i can do a test signal just to know if the laser is broken or not?

Here is the operations manual for the laser;
http://www.photonics.byu.edu/Co2_Laser. ... manual.pdf

And here for the laser cutter itself(cant find the software to see which fault error i've got);
http://www.readbag.com/cs-uml-ecg-pub-u ... al-8003v14

Cheers Hans Leroy
joskerel
 
Posts: 15
Joined: Wed Jul 18, 2012 5:51 am

Re: Synrad laser 48-2

Postby joskerel » Wed Dec 12, 2012 9:06 am

figured it out, thanks anyway ;-)
joskerel
 
Posts: 15
Joined: Wed Jul 18, 2012 5:51 am


Return to Optics and Lasers

Who is online

Users browsing this forum: No registered users and 6 guests

cron