Do PRO optics reflection mirrors fit 2.X mounting plates

Discussions on optics for laser cutter/engravers

Do PRO optics reflection mirrors fit 2.X mounting plates

Postby rsm5178 » Thu Apr 24, 2014 10:44 pm

Does anyone happen to know if the so called PRO optics will fit the mounting plates:

http://www.lightobject.com/Pro-20mm-ref ... -P589.aspx

Marco @ LightObject didn't really have dimensions on them.
rsm5178
 
Posts: 119
Joined: Tue Jul 23, 2013 9:57 pm
Location: 19425

Re: Do PRO optics reflection mirrors fit 2.X mounting plates

Postby Improbable Construct » Tue Apr 29, 2014 2:06 am

They do not fit!
I tried them and it was all bad.
They are too big, too tall, and just generally don't fit.
Improbable Construct
 
Posts: 57
Joined: Wed Feb 15, 2012 1:27 am

Re: Do PRO optics reflection mirrors fit 2.X mounting plates

Postby rsm5178 » Wed Apr 30, 2014 4:30 pm

Thank you for taking the time to let me know that! Any alternative suggestions?

-Rich
rsm5178
 
Posts: 119
Joined: Tue Jul 23, 2013 9:57 pm
Location: 19425

Re: Do PRO optics reflection mirrors fit 2.X mounting plates

Postby bloq » Sat Jul 11, 2015 6:56 am

This is a really old thread but the question is still young. I really dislike the mirrors which were meant to be for the laser and same goes for the laser head. the 20 mm lens just does not fit inside very well. It is not a good design if you cannot fully close it anymore. I already scratched the high quality lens (50 bucks!) although i was really careful. I really would appreciate suggestiosn for a better head ...
bloq
 
Posts: 88
Joined: Mon Dec 29, 2014 9:15 am


Return to Optics and Lasers

Who is online

Users browsing this forum: No registered users and 1 guest