Do PRO optics reflection mirrors fit 2.X mounting plates
Posted:
Thu Apr 24, 2014 10:44 pmby rsm5178
Does anyone happen to know if the so called PRO optics will fit the mounting plates:
http://www.lightobject.com/Pro-20mm-ref ... -P589.aspxMarco @ LightObject didn't really have dimensions on them.
Re: Do PRO optics reflection mirrors fit 2.X mounting plates
Posted:
Tue Apr 29, 2014 2:06 amby Improbable Construct
They do not fit!
I tried them and it was all bad.
They are too big, too tall, and just generally don't fit.
Re: Do PRO optics reflection mirrors fit 2.X mounting plates
Posted:
Wed Apr 30, 2014 4:30 pmby rsm5178
Thank you for taking the time to let me know that! Any alternative suggestions?
-Rich
Re: Do PRO optics reflection mirrors fit 2.X mounting plates
Posted:
Sat Jul 11, 2015 6:56 amby bloq
This is a really old thread but the question is still young. I really dislike the mirrors which were meant to be for the laser and same goes for the laser head. the 20 mm lens just does not fit inside very well. It is not a good design if you cannot fully close it anymore. I already scratched the high quality lens (50 bucks!) although i was really careful. I really would appreciate suggestiosn for a better head ...