Maker slide time lapse camera rig
All this great info from a post on Openmoco called miniE or miniEngine got me going
http://openmoco.org/http://www.farbdoktoren.de/minie/?page_id=67http://www.farbdoktoren.de/minie/HardwareArduino
DF Robot LCD shield
Proto shield
Sparkfun driver
See the above links for all the details
The Short Story:
Close to final product
Getting the safety, camera trigger, and motor driver all working.
I'm sure this will all fit
Slowly getting under control
Somehow it all fit
Testing the connection to the motor. Used a 4 pin mic jack.
Starting to wire the safety swtches
Close up of the LCD and power switches
Basically done, still need to finish the tripod clamps and do a bit of clean up.
Let me know if you have any questions I can try to help out.