pjeran wrote:Here is what I was thinking for the table.
http://www.mcmaster.com/#aluminum-honeycomb/=k6l0yi
macona wrote:Be careful with the TTS system. I had it for my mill and I was having a lot of issue with the tool holders pulling out of the spindle. Lost a few work pieces to it.
Line Quantity Product
Ships Unit price Total Delete
1
32 each
8548K42
Structural Fiberglass Square Tube 1-1/4" X 1-1/4", 1/8" Wall Thickness, 5' Length
Laser frame, laser lid frame, etc.
1 week
Need this sooner?
$10.50 each 336.00
2
1 each
8982K86
Multipurpose Aluminum (Alloy 6061) 90 Deg Angle, 1/4" Thk, 1-1/2" X 1-1/2" Legs, 8' L
Angle brackets for fiberglass laser frame and aluminum laser bed frame.
today 52.27 each 52.27
3
8 packs
90203A313
Pan Head Drilling Screw for Metal 410 SS, 8-18 Thread, 3/4" Length, Drill Point #2, packs of 50
Self drilling self tapping screws for angle brackets, for use with fiberglass and aluminum substrates.
today 5.42 pack 43.36
4
6 each
1942K72
High Capacity Leveling Mount w/ SS Stud 1/4"-20 X 1-1/2" L Thread, 1-3/16" Base Dia
Feet for the laser frame, contact with the floor, leveling.
today 5.11 each 30.66
5
1 ft.
8660K39
Chemical-Resistant Gray Type 1 PVC Rect Bar 1-1/4" Square
Material for machined inserts for the bottoms of the fiberglass legs, silicone adhesive to seal into place with machined lip on the bottom to engage the bottom of the leg, with 1/4-20 tapped hole in the center for the leveling foot.
today 8.27 ft. 8.27
6
1 each
1575A75
Aluminum Piano Hinge with Holes Clear Anodized Fnsh,.060" Thk, 2" W, 6'Length
Full length hinge for the laser lid
today 18.70 each 18.70
7
1 pack
90203A250
Pan Head Drilling Screw for Metal 410 SS, 6-20 Thread, 1/2" Length, Drill Point #2, packs of 100
Self drilling self tapping screws for the laser lid hinge.
today 7.05 pack 7.05
8
1 each
1950A1
Choose-A-Color Pull Handle W/Through Hole Rectangular, Nylon, Gray Dots, 4-3/4" Ctr-to-Ctr
Handle for the laser lid, centered in the front.
today 9.00 each 9.00
9
4 each
6546K393
Multipurpose Aluminum (Alloy 6061) Rect Tube 1/8" Wall Thickness, 1" X 2", 6' Length
Frame for the laser bed, with two center supports. The perforated stainless laser bed screws down into the upper 1" wide surface of the 2" tall frame.
today 42.06 each 168.24
10
1 pack
90065A108
Flat Head Phillips Screw for Sheet Metal 18-8 Stainless Steel, NO. 4 Size, 3/8" Length, packs of 100
Flat head screw to attach the perforated stainless laser bed to the laser bed frame. Slight reaming of the perforation holes may be required when countersinking the top surface for the flat head screws.
today 4.07 pack 4.07
11
2 each
89755K41
Architectural Aluminum (Alloy 6063) 1/4" Thick X 1/2" Width, 8' Length
Top edge strip for the laser bed frame. Overlaps joints to help to secure them, but is mostly an alignment edge for material placed on the laser bed.
today 8.42 each 16.84
12
1 pack
94195A120
Flat Head Drilling Screw for Metals 410 SS, 6-20 Thread, 3/4" Length, Drill Point #2, packs of 100
Self drilling self tapping screws to secure the top edge strip to the top of the laser bed frame.
today 10.51 pack 10.51
1 8548K42 32 Each Structural Fiberglass Square Tube, 1-1/4" X 1-1/4", 1/8" Wall Thickness, 5' Length
2 8982K86 1 Each Multipurpose Aluminum (alloy 6061), 90 Deg Angle, 1/4" Thk, 1-1/2" X 1-1/2" Legs, 8' L
3 90203A313 8 Packs Pan Head Drilling Screw For Metal, 410 Ss, 8-18 Thread, 3/4" Length, Drill Point #2
Users browsing this forum: No registered users and 46 guests