Buildlog.net 2.x 1250mm wide Laser Cutter

Post questions about build logs here

Re: Buildlog.net 2.x 1250mm wide Laser Cutter

Postby jv4779 » Tue Nov 06, 2012 1:46 pm

My 2.x is scaled up to 780mm X 430mm. This is already much larger than the standard 2.x. I wouldn't go larger than this for a makerslide based machine. Makerslide is straight, but not really that straight. While doing final leveling it was impossible to get dead level with my machinist level because of bow and twist in the material. I was able to get the alignment good enough to cut, but it needs periodic tweaking.

One advantage of a later size is if you want a higher power tube it fits no problem.

Jeremy
jv4779
 
Posts: 40
Joined: Fri Dec 09, 2011 10:54 pm

Previous

Return to Questions and Discussions about Build Logs

Who is online

Users browsing this forum: No registered users and 2 guests

cron