what`s thebiggest size that can be built...??????
Posted: Sat Apr 30, 2016 3:25 pmwhats the maximum size I can stretch this out to..
going for 36 in X
24 in Y
7 in Z
buildlog.net
Building CNC Machines - Laser/Routers/Etc.
https://buildlog.net/forum/
what`s thebiggest size that can be built...??????
Page 1 of 2
Posted: Sat Apr 30, 2016 3:25 pmRe: what`s thebiggest size that can be built...??????
Posted: Sat Apr 30, 2016 5:29 pmRe: what`s thebiggest size that can be built...??????
Posted: Sun May 01, 2016 9:57 amjust curious... WHAT? a cruiseboat or a wristwatch?
Kees
Kees
Re: what`s thebiggest size that can be built...??????
Posted: Sun May 01, 2016 11:42 pmlol buildlog 2x laser
Re: what`s thebiggest size that can be built...??????
Posted: Mon May 02, 2016 1:44 pm24x36 is the size I built.
Scott
Scott
Re: what`s thebiggest size that can be built...??????
Posted: Tue May 03, 2016 1:35 amsswarts...you have any issues. what kind of speed are you getting I used that script to enlarge it. Would you be willing to share pics...
Re: what`s thebiggest size that can be built...??????
Posted: Tue May 03, 2016 2:22 pmI think you found my buildlog for pictures. I'm not sure how to answer your speed question. Speed is really about the material you are cutting and the wattage of the tube, PPI, etc. The biggest challenge I had with going larger is staying square and optics alignment.
Re: what`s thebiggest size that can be built...??????
Posted: Wed May 04, 2016 1:18 amok is this similar to what you got just gonna order the extrusion and see but trying to go 20mm or actually 1 inch...
Saved backup file: C:/Users/Patrick/Documents/OpenSCAD/backups/parametric_buildlog_laser_2-backup-gqHp6812.scad
Compiling design (CSG Tree generation)...
ECHO: "GANTRY"
ECHO: " MakerSlide: 1 x 1110mm (43.7008in)"
DEPRECATED: Support for reading files in linear_extrude will be removed in future releases. Use a child import() instead.
DEPRECATED: The import_stl() module will be removed in future releases. Use import() instead.
ECHO: " MakerSlide: 2 x 865mm (34.0551in)"
ECHO: " EconoBelt: 1 x 2336.8mm (cut) (93in, rounded up)"
ECHO: " EconoBelt: 2 x 1625.6mm (cut) (64in, rounded up)"
ECHO: " (shaft src): 1 x 558.8mm (22in)"
ECHO: " (shaft src): 1 x 508mm (20in)"
ECHO: "Z TABLE"
ECHO: " 2 x HFS5-2020-987 987mm (38.8583in)"
ECHO: " 2 x HFS5-2020-675 675mm (26.5748in)"
ECHO: "Z TABLE PANEL"
ECHO: " 1 x C19010 987mm x 715mm (38.8583in x 28.1496in)"
ECHO: "Z LEADSCREWS"
ECHO: " 3 x B18009-xxxx (0.25in,20tpi threaded rod) 280.2mm (11.0315in)"
ECHO: " 1 x B18009-xxxx (0.25in,20tpi threaded rod) 331mm (13.0315in)"
ECHO: "Z CLOSED BELT"
ECHO: " EconoBelt: 1 x B28035 (loop timing belt) : close to 2726.08mm (~107.3in, rounded)"
ECHO: "FRAME"
ECHO: " Misumi 2040:"
ECHO: " 2 x HFS5-2040-1367 1367mm (53.8189in)"
ECHO: " Misumi 2020:"
ECHO: " 4 x HFS5-2020-387 387mm (15.2362in)"
ECHO: " 3 x HFS5-2020-1367 1367mm (53.8189in)"
ECHO: " 3 x HFS5-2020-1137 1137mm (44.7638in)"
ECHO: " 1 x HFS5-2020-1132 1132mm (44.5669in)"
ECHO: " 7 x HFS5-2020-865 865mm (34.0551in)"
ECHO: " 1 x HFS5-2020-230 230mm (9.05512in)"
ECHO: " 1 x HFS5-2020-90 90mm (3.54331in)"
ECHO: " 1 x HFS5-2020-237 237mm (9.33071in)"
ECHO: "COVER"
ECHO: " 2 x HFS5-2020-1132 1132mm (44.5669in)"
ECHO: " 2 x HFS5-2020-745 745mm (29.3307in)"
ECHO: "COVER WINDOW PANEL"
ECHO: " 1132mm x 785mm (44.5669in x 30.9055in)"
Saved backup file: C:/Users/Patrick/Documents/OpenSCAD/backups/parametric_buildlog_laser_2-backup-gqHp6812.scad
Compiling design (CSG Tree generation)...
ECHO: "GANTRY"
ECHO: " MakerSlide: 1 x 1110mm (43.7008in)"
DEPRECATED: Support for reading files in linear_extrude will be removed in future releases. Use a child import() instead.
DEPRECATED: The import_stl() module will be removed in future releases. Use import() instead.
ECHO: " MakerSlide: 2 x 865mm (34.0551in)"
ECHO: " EconoBelt: 1 x 2336.8mm (cut) (93in, rounded up)"
ECHO: " EconoBelt: 2 x 1625.6mm (cut) (64in, rounded up)"
ECHO: " (shaft src): 1 x 558.8mm (22in)"
ECHO: " (shaft src): 1 x 508mm (20in)"
ECHO: "Z TABLE"
ECHO: " 2 x HFS5-2020-987 987mm (38.8583in)"
ECHO: " 2 x HFS5-2020-675 675mm (26.5748in)"
ECHO: "Z TABLE PANEL"
ECHO: " 1 x C19010 987mm x 715mm (38.8583in x 28.1496in)"
ECHO: "Z LEADSCREWS"
ECHO: " 3 x B18009-xxxx (0.25in,20tpi threaded rod) 280.2mm (11.0315in)"
ECHO: " 1 x B18009-xxxx (0.25in,20tpi threaded rod) 331mm (13.0315in)"
ECHO: "Z CLOSED BELT"
ECHO: " EconoBelt: 1 x B28035 (loop timing belt) : close to 2726.08mm (~107.3in, rounded)"
ECHO: "FRAME"
ECHO: " Misumi 2040:"
ECHO: " 2 x HFS5-2040-1367 1367mm (53.8189in)"
ECHO: " Misumi 2020:"
ECHO: " 4 x HFS5-2020-387 387mm (15.2362in)"
ECHO: " 3 x HFS5-2020-1367 1367mm (53.8189in)"
ECHO: " 3 x HFS5-2020-1137 1137mm (44.7638in)"
ECHO: " 1 x HFS5-2020-1132 1132mm (44.5669in)"
ECHO: " 7 x HFS5-2020-865 865mm (34.0551in)"
ECHO: " 1 x HFS5-2020-230 230mm (9.05512in)"
ECHO: " 1 x HFS5-2020-90 90mm (3.54331in)"
ECHO: " 1 x HFS5-2020-237 237mm (9.33071in)"
ECHO: "COVER"
ECHO: " 2 x HFS5-2020-1132 1132mm (44.5669in)"
ECHO: " 2 x HFS5-2020-745 745mm (29.3307in)"
ECHO: "COVER WINDOW PANEL"
ECHO: " 1132mm x 785mm (44.5669in x 30.9055in)"
Re: what`s thebiggest size that can be built...??????
Posted: Thu May 05, 2016 5:22 pmNot sure I understand your question. HFS5-2020 is already a 20x20mm extrusion (exception of two 20x40 pieces in the frame).
Scott
Scott
Re: what`s thebiggest size that can be built...??????
Posted: Sat May 07, 2016 5:52 amSorry what I meant was did you use metric 20x20 or did you go standard 25.4x25.4... theres 5.4 mm difference in conversion from metric to standard which is a difference of .213 inches... sorry I'm a Machinist so I'm alittle knit picky figure going standard the extra .213 would help with the frame being rigid..