All SOLDHere are pictures of the X-Y table 400 x 600 from LightObject and the mounts I made. The table has 2 stepper motors installed along with the micro switches. Meant for building a laser engraver Link>
http://www.lightobject.com/Lite-400600- ... -P715.aspx.
FYI in case anyone is wondering, yes I always make a donation to any Forum I am active in online.
Contact Email: wmgeorge64 at Hotmail dot com
I have a complete McMaster Carr and Misumi order enough I believe for at least one 2.x build, but you will need a way to cut as a hacksaw. I have 10pc's 1400 mm long plus another 2800 mm of cut pieces, of the HFS5 2020 stuff, 45 of the angle corners , 200 of the 5mm captive nuts, 5mm socket head cap screws (200), 2 sets of hinges and more. I have a Word Doc I will try to attach but can send via email with the complete Lists
But $85 takes it all plus PayPal, and actual shipping costs if needed. Price for table with mounts installed (no optics) is $175 plus shipping and PayPal is fine. The red dot shown is just a laser level I used for alignment.
Retired guy, Central Iowa US. Master Electrician Hobby Machine and Metal Fab Shop.