which hex keys for pulleys?

Questions, Suggestions, Tips, Etc

which hex keys for pulleys?

Postby ag3c » Mon Jan 27, 2014 10:22 pm

Hey all ... finally getting started on my 2.x laser. Frame went up with few problems. Props to ImprobableConstruct for some amazing skins.

I'm now working on the Z lift assemblies, and I'm finding that none of my hex keys really fit the A6T16-020DF2508 pulleys' set screws. Before I take them out and file slots into them, does anyone know what the proper size hex key to drive these guys is?

Thanks!
ag3c
 
Posts: 16
Joined: Thu Sep 09, 2010 11:51 pm

Re: which hex keys for pulleys?

Postby cvoinescu » Tue Jan 28, 2014 12:12 am

If the part is indeed the Stock Drive Products A 6T16-020DF2508, the set screw is #6-32 with a 1/16" hex socket drive. So you need a 1/16" Allen key. From experience, 1.5 mm will appear to work, but being a tad too small it will slip and destroy the hex socket.
Last edited by cvoinescu on Tue Jan 28, 2014 11:21 pm, edited 1 time in total.
cvoinescu
 
Posts: 501
Joined: Thu Aug 09, 2012 9:12 am
Location: Camberley, Surrey, UK

Re: which hex keys for pulleys?

Postby ag3c » Tue Jan 28, 2014 11:15 pm

Thanks, that helped a lot. (Confirmed that the set screws are #6-32 and driven by a 1/16" hex key.)
ag3c
 
Posts: 16
Joined: Thu Sep 09, 2010 11:51 pm


Return to 2.x Laser Support

Who is online

Users browsing this forum: No registered users and 14 guests

cron