Easiest way
Posted: Sat Mar 09, 2013 10:16 amWhat's easiest way to stop carriages from falling off track.
Page 1 of 1
Posted: Sat Mar 09, 2013 10:16 amRe: Easiest way
Posted: Sat Mar 09, 2013 2:58 pmYou need to be a little more specific. Actually, you need to be a lot more specific.
Re: Easiest way
Posted: Sat Mar 09, 2013 8:41 pmBetter railway signalization?
Re: Easiest way
Posted: Sat Mar 09, 2013 8:58 pmSorry,
I have this horizontal carriage and wooden plate combination riding on makerslide.
download/file.php?id=4535&mode=view
It can be manually moved (by hand) on the track but want to make sure those carriage wheels dont flip off the track and the end of its travel. Could put a buffer at end of track?.. or could I add a bolt or something vertically at the end of the 1metre track this will ride on?.. Simple solution will be best.
I have this horizontal carriage and wooden plate combination riding on makerslide.
download/file.php?id=4535&mode=view
It can be manually moved (by hand) on the track but want to make sure those carriage wheels dont flip off the track and the end of its travel. Could put a buffer at end of track?.. or could I add a bolt or something vertically at the end of the 1metre track this will ride on?.. Simple solution will be best.
Re: Easiest way
Posted: Sat Mar 09, 2013 9:20 pmThe easiest way is to add a bolt/T-nut in the slot that is tall enough to bump into the carriage.