User Manual For DSP Main Board

Discussions and help on this commercial controller.

Moderator: twehr

User Manual For DSP Main Board

Postby bdring » Sat Jul 16, 2011 11:28 am

Attached is the most recent version of the user manual for the electronics.
Attachments
User manual of mainboard_v1.12.pdf
Thunderlaser manual
(633.67 KiB) Downloaded 1249 times
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: User Manual For DSP Main Board

Postby J45on » Sat Jul 16, 2011 5:08 pm

Thanks Bart
On page 6 and 7 it shows different motor driver wiring :?
Which one should I use and what is the difference ?
J45on
 
Posts: 258
Joined: Thu Mar 31, 2011 11:30 am
Location: Kent,united kingdom

Re: User Manual For DSP Main Board

Postby bdring » Sat Jul 16, 2011 6:08 pm

I believe that is correct. It determines whether your pulse goes from low to high or high to low. I think you use the one on the top of page 6.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: User Manual For DSP Main Board

Postby twehr » Mon Jul 18, 2011 12:15 pm

bdring wrote:I believe that is correct. It determines whether your pulse goes from low to high or high to low. I think you use the one on the top of page 6.


Correct. Top of page should be correct.
tim
--
"The answer is usually easy and obvious once you know what it is." tw

DIYLaser Blog
SemiHomemadeTools.com
twehr
 
Posts: 439
Joined: Mon May 24, 2010 4:49 pm


Return to Commercial DSP CO2 Laser Engraving/ Cutter Controller

Who is online

Users browsing this forum: No registered users and 9 guests

cron