LO DSP version 4.47?

Discussions and help on this commercial controller.

Moderator: twehr

LO DSP version 4.47?

Postby LeonS » Wed Aug 10, 2011 6:23 pm

Is anyone using this version? If I load it, will I need to redo all my settings?

Apologies from a newbie,
Leon
LeonS
 
Posts: 145
Joined: Wed Nov 25, 2009 8:09 pm
Location: Herndon, VA

Re: LO DSP version 4.47?

Postby whmeade10 » Wed Aug 10, 2011 6:59 pm

LeonS wrote:Is anyone using this version? If I load it, will I need to redo all my settings?

Apologies from a newbie,
Leon


You shouldn't have to redo your settings because they are read from and written to the DSP. I am at work and well check when I get home tonight. I think I have already upgraded to 4.47, but not sure.

Bill
FSE 45w Deluxe CO2 Laser 5th Gen w/X7 DSP | CorelDRAW X7
whmeade10
 
Posts: 215
Joined: Sat Dec 18, 2010 3:35 am
Location: Sedalia, KY

Re: LO DSP version 4.47?

Postby trwalters001 » Thu Aug 11, 2011 1:55 pm

Hi All,

It looks like I may have missed something here...

Am I to understand that I can update the firmware in a LO DSP with the firmware from Thunder Laser?

If so, what does it gain me and how do I do it?

Thanks!

Tim
trwalters001
 
Posts: 173
Joined: Sun Oct 24, 2010 10:08 pm
Location: Atlanta, GA

Re: LO DSP version 4.47?

Postby whmeade10 » Thu Aug 11, 2011 7:06 pm

trwalters001 wrote:Hi All,

It looks like I may have missed something here...

Am I to understand that I can update the firmware in a LO DSP with the firmware from Thunder Laser?

If so, what does it gain me and how do I do it?

Thanks!

Tim


What Leon is talking about above is upgrading the PC Software that the DSP uses. The firmware in the DSP is different and has to be reprogrammed by the manufacturer, which I may have done to mine, LO to TL. I will have to send it off to have it reprogrammed.

Bill
FSE 45w Deluxe CO2 Laser 5th Gen w/X7 DSP | CorelDRAW X7
whmeade10
 
Posts: 215
Joined: Sat Dec 18, 2010 3:35 am
Location: Sedalia, KY


Return to Commercial DSP CO2 Laser Engraving/ Cutter Controller

Who is online

Users browsing this forum: No registered users and 14 guests

cron