LightObject DSP Controller Pictures

Discussions and help on this commercial controller.

Moderator: twehr

LightObject DSP Controller Pictures

Postby bdring » Fri Nov 11, 2011 11:55 pm

Here is a picture of the new 2012 LightObject Controller.

lo_dsp_01 (Medium).JPG


There are more pictures on the Wiki
http://www.buildlog.net/wiki/doku.php?i ... p:pictures
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: LightObject DSP Controller Pictures

Postby Groover » Sun Nov 13, 2011 5:58 pm

Is there any mounting dimensions available? I'm planing on using this controller but my current financial situation require me to buy just some of the parts every month I will not be able to buy one for a couple of month. Still, I want to plan ahead and make enough room for it.
Groover
 
Posts: 17
Joined: Fri May 14, 2010 1:04 pm
Location: Sweden

Re: LightObject DSP Controller Pictures

Postby mattrsch » Tue Nov 15, 2011 3:23 am

It measures about 5.9" X 8" including the screw terminals. The hole pattern is about 4.6" X 7.5"
mattrsch
 
Posts: 98
Joined: Wed Jul 21, 2010 5:09 pm


Return to Commercial DSP CO2 Laser Engraving/ Cutter Controller

Who is online

Users browsing this forum: No registered users and 14 guests

cron