Dual extruder Firmware Confusion

Topics Related to the ORD Bot Printer

Dual extruder Firmware Confusion

Postby CRJ » Wed Jul 16, 2014 10:16 pm

Hi all, I'm a fairly new owner of an Ordbot Hadron and this is my first post on buildlog so if this should be posted somewhere else, or already has a thread somewhere please let me know.

Anyway, I'm running an azteeg x3 pro with a version of marlin I've configured myself. Everything works great for a single extruder but I cant seem to figure out how to get the second ectruder up and running. I set it to 2 extruders under configuration.h and made sure everything was set up properly in pins.h but when I connect with Repetier, it says "Extruder_Count:1" and when I switch it to extruder 2 I get a "T INVALID EXTRUDER" error. I'm at a loss here so any help would be greatly appreciated!
CRJ
 
Posts: 2
Joined: Wed Jun 11, 2014 4:53 am

Re: Dual extruder Firmware Confusion

Postby blah_59 » Tue Jul 22, 2014 6:51 pm

Here's a link to the thread explaining how I got it to work:

http://www.buildlog.net/forum/viewtopic.php?f=33&t=2067
blah_59
 
Posts: 158
Joined: Wed Aug 29, 2012 10:08 am


Return to ORD Bot

Who is online

Users browsing this forum: No registered users and 27 guests

cron