Ordbot Spares
Posted:
Wed Apr 01, 2015 10:22 pm
by grezmel
Hi, can anyone tell me where I can get spares from, specifically part number B17061 - Z lift blocks
Thanks Graham
Re: Ordbot Spares
Posted:
Wed Apr 01, 2015 10:28 pm
by rsm5178
I just hand drilled 3/8th inch cutting board and put these (see link) under it to add support and set the height.
(
http://www.automationtechnologiesinc.co ... -and-right)
You could jut print them and get something good enough to work.
Rich
Re: Ordbot Spares
Posted:
Sun Apr 05, 2015 7:06 am
by grezmel
Thanks for your help. Isn't it possible to get original Ordbot spares ?
Re: Ordbot Spares
Posted:
Wed Apr 15, 2015 8:54 pm
by madmike8
Get the anti wobble kit... you'll be happier...
There are some printable versions of the blocks out there too...
Re: Ordbot Spares
Posted:
Thu Apr 16, 2015 7:11 am
by grezmel
Where do I buy the anti wobble kit from?
Re: Ordbot Spares
Posted:
Thu Apr 16, 2015 2:41 pm
by madmike8