PPI in cheap glass CO2 laser tube

Electronics related to CNC

PPI in cheap glass CO2 laser tube

Postby erikcrane » Mon Nov 26, 2018 9:43 am

Hi,

1 year ago I bought a K40 chinese laser machine. The only update I made is air assist head and now I would to upgrade all machine. After I modify working area to use all posible working area, like Ariel Yahani made with his machine [ulr]https://openbuilds.com/builds/uk40ob.3988/[/url], I would upgrade my moshidraw controller.

Searching information about controllers I found the ppi. I have been reading posts in this forum about it and read the entry blog of dirktheeng. Por lo que he leido usar el laser en modo ppi hace que tengas una mejor calidad de corte, el tubo laser se calienta menos y le sacas el maximo partido a la potencia del laser.

After reading about advantage of using PPI I don't understand why is not widely used in DIY machines. Is it because there aren't a plug and play solution? Or is it because only expensive laser tube can use this method of cutting?
erikcrane
 
Posts: 1
Joined: Tue Nov 13, 2018 3:29 pm

Re: PPI in cheap glass CO2 laser tube

Postby Techgraphix » Tue Nov 27, 2018 10:19 pm

PPI is not a matter of using an expensive laser tube.. every lasertube could do that..
But it's a software thing.. If your software supports that, it will work.
Kees
Techgraphix
 
Posts: 122
Joined: Fri Feb 24, 2012 8:37 pm
Location: Appelscha, NL


Return to Electronics

Who is online

Users browsing this forum: No registered users and 30 guests

cron