Mystery power supply

Electronics related to CNC

Re: Mystery power supply

Postby educa » Thu Jan 19, 2012 10:42 am

And your tube is xxx Watt and comes from yyy ?
educa
 
Posts: 239
Joined: Thu Dec 22, 2011 9:13 pm

Re: Mystery power supply

Postby MattyZee » Fri Jan 20, 2012 2:47 am

educa, check out Gregs build log for those specifics http://www.buildlog.net/forum/viewtopic.php?f=16&t=1002#p7896

Greolt wrote:That pic above did not include cable....If you did not get the cable then a mistake has been made.


Bugger, thats what i suspected. Nope, wasn't included in my shipment. Have contacted seller and apparently they will be shipping me one. So here's hoping....
MattyZee
 
Posts: 15
Joined: Thu Mar 03, 2011 8:29 am

Re: Mystery power supply

Postby educa » Fri Jan 20, 2012 6:31 am

ok I allready seem to have read that buildlog.

My laser related parts and optics also come from coletech. I allready have the optics but laser is really the last thing I'll buy in the whole setup, so not for me yet :)

I must say that I am a little affraid of 25000V (even at littkle amperage) so thats why I want to be very sure I can safly and securely connect the leads from PSU to tube.

I also will go this evening to a special shop that does only sell compressed air parts to see what tube and fitting I need to connect the air nozzle on the coletech laser head to my tube, since I don't know anything about these connections. I allready measured a 6mm hole on some kind of pressing connector, so I'm pretty sure there will be a standard connector type for this :=)
educa
 
Posts: 239
Joined: Thu Dec 22, 2011 9:13 pm

Re: Mystery power supply

Postby Greolt » Fri Jan 20, 2012 7:21 am

I hope it does not get delayed too much with Chinese New Year.

Everything seems to stop for a while over there. :)

Greolt
Greolt
 
Posts: 127
Joined: Tue Nov 29, 2011 7:22 am

Re: Mystery power supply

Postby lovebugjunkie » Fri Jan 20, 2012 3:10 pm

Greolt wrote:I hope it does not get delayed too much with Chinese New Year.

Everything seems to stop for a while over there. :)

Greolt


My experience when ordering anything during Chinese New Year from China is not to expect it until the 2 or third week of Feb.
If you get it sooner, you have better luck than I.
lovebugjunkie
 
Posts: 50
Joined: Fri Sep 10, 2010 6:18 pm
Location: Arizona City Arizona

Previous

Return to Electronics

Who is online

Users browsing this forum: No registered users and 9 guests

cron