Arduino Stepper Shield Gerbers & Bill of Material Available?

Electronics related to CNC

Re: Arduino Stepper Shield Gerbers & Bill of Material Availa

Postby bdring » Sat Apr 07, 2012 10:15 pm

They are all gone now.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: Arduino Stepper Shield Gerbers & Bill of Material Availa

Postby Enraged » Sun Apr 08, 2012 2:29 am

Bart, you may have your own source for the boards, but I have had good luck with Seeedstudio. My arduino shield was $35 for 10 boards with a custom color, and the turnaround time is less than a week from order to them shipping the boards out. Might be worth a look if there is a bunch of demand (especially given the 150 Shapeokos sold on Inventables).
Enraged
 
Posts: 439
Joined: Fri May 06, 2011 3:13 pm

Re: Arduino Stepper Shield Gerbers & Bill of Material Availa

Postby T3PRanch » Thu Apr 19, 2012 11:46 pm

Anyone have a spare blank board or kit for sale?

Thurmond
T3PRanch
 
Posts: 2
Joined: Thu Apr 19, 2012 11:31 pm

Re: Arduino Stepper Shield Gerbers & Bill of Material Availa

Postby bdring » Thu Apr 19, 2012 11:58 pm

I have 17 raw boards, but no time to kit or ship them for a couple weeks. Edward Ford is coming over tonight. I'll see if he wants to sell them.
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: Arduino Stepper Shield Gerbers & Bill of Material Availa

Postby T3PRanch » Fri Apr 20, 2012 2:20 am

bdring wrote:I have 17 raw boards, but no time to kit or ship them for a couple weeks. Edward Ford is coming over tonight. I'll see if he wants to sell them.


Thanks Bart, Let me know. PayPal ready! ;)

Thurmond
T3PRanch
 
Posts: 2
Joined: Thu Apr 19, 2012 11:31 pm

Re: Arduino Stepper Shield Gerbers & Bill of Material Availa

Postby bdring » Fri Apr 20, 2012 12:27 pm

Edward has them all now. contact him
Bart
"If you didn't build it, you will never own it."
bdring
Site Admin
 
Posts: 2966
Joined: Sun Nov 22, 2009 7:33 pm
Location: Chicago, IL, USA

Re: Arduino Stepper Shield Gerbers & Bill of Material Availa

Postby edward.ford » Sun Apr 29, 2012 8:15 pm

For anyone who is still looking for a stepper shield ,I have about 5 left. they are of the full kit variety (PCB + all components except pololu drivers) and cost $25 each. Shipping is included for domestic. If you're international, let me know and we'll figure something out.

If you're interested, send me an email edward @shapeoko dot com

-Edward
edward.ford
 
Posts: 8
Joined: Mon Oct 17, 2011 5:06 pm

Re: Arduino Stepper Shield Gerbers & Bill of Material Availa

Postby peterashuk » Fri Nov 16, 2012 9:32 pm

Hi

Thanks for posting the Gerber files, unfortunately, I can find a program to open the .art files.

I was hoping to print them out on my laser printer to make a prototype PCB.

I just need the top and bottom layers.

Peterashuk


bdring wrote:Here is the latest Gerber files and schematic. This rev was ordered a few days ago and is untested, but low risk.

Changes....

Now Stock GRBL pinout (XYZ)
Change 0.1uf Caps to smaller footprint
Configurable 4th axis.
peterashuk
 
Posts: 1
Joined: Fri Nov 16, 2012 4:25 pm

Re: Arduino Stepper Shield Gerbers & Bill of Material Availa

Postby ejs » Mon Dec 10, 2012 4:14 am

I thought I should mention, Bart gave permission for these to be produced, and I've sold several dozen over at the ShapeOko forums and tindie. You can find the board at http://www.bit.ly/reactshop
ejs
 
Posts: 2
Joined: Thu Sep 20, 2012 5:57 pm

Previous

Return to Electronics

Who is online

Users browsing this forum: No registered users and 0 guests