Real time auto focus laser head

Discussions and help on this commercial controller.

Moderator: twehr

Real time auto focus laser head

Postby Speedythinker » Tue Oct 30, 2018 4:28 pm

Please pay attention the keyword of "Real time". Unlike what you seem those 'auto focus' laser head which allow one time focus point correction per use. Our RTAF auto focus head is tracking the surface distance real time and it keep changing the height over the job. It is a great feature when you're dealing with a 8x5 plywood that is not flatted. Without help from the RTAF, most of you folks need to find a way to tight up the wood sheet and make it level enough for the laser to engrave or cutting.

AutoFocusHead.jpg



See our demo on you tube:
https://youtu.be/x_-AXKikVkE
https://youtu.be/rqhp5bXEl6M


Marco
LightObject.com
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am

Re: Real time auto focus laser head

Postby Speedythinker » Fri Feb 08, 2019 12:47 am

We made it!
See cutting job with Auto Focus assisted

Samples.jpg

Butterfly1.jpg

Anchor.jpg











Marco
LightObject
Speedythinker
 
Posts: 135
Joined: Wed Oct 19, 2011 12:06 am


Return to Commercial DSP CO2 Laser Engraving/ Cutter Controller

Who is online

Users browsing this forum: No registered users and 0 guests

cron